Shalex SealIt Multipurpose is a water-based general purpose clear waterproofing compound designed for use on a wide variety of substrates.
SealIt Multipurpose is especially suited to sealing and protecting porous vertical masonry surfaces such as split-faced or decorative concrete blocks. SealIt is particularly effective against wind-driven rain and unlike 'water repellent' style sealers, can withstand hydrostatic pressures caused by significant weather events. SealIt is UV stable and provides long term protection (i.e. > 10 years)
SealIt Multipurpose dries to a clear low sheen finish and remains flexible to accommodate minor movement in the substrate. SealIt can be overpainted with any acrylic paint. Due to exceptional adhesion SealIt is well suited as a primer for acrylic architectural topcoats, elastomeric and roofing paints.
SealIt is a very soft sealer and not suitable for horizontal surfaces subject to traffic (e.g. paths, pavers, floors etc) unless they are to be covered with tiles, carpet, or harder coatings.
Features:
- Tested to ASTM E514.74 - Rated 'E' for excellent on water permeance
- Excellent adhesion
- Cost-effective and gives long-lasting protection
- Highly flexible
- Waterborne for easy application and clean-up
- Safe to use with minimal vapour
- Dries to a clear, low-sheen finish
- May be painted over with any acrylic based paint
Uses
- Clay and masonry bricks/blocks
- Cement render
- Concrete slabs
- Wet areas
- Fibre cement sheeting
- Leaking showers
- Particleboard flooring
- Coloured masonry
- Fishponds & troughs
- Concrete tilt panels
- Terracotta pots
- Undercoats / sealer
- Concrete ponds
- Sealing screeds
- Fibro roofs
Technical Data
- No. of Coats 2 - 3
- Coverage 1L = approx. 5m
- Drying Time 2 - 4 hours
- Fully Cured 7 days
- Clean up
- When wet: Water | When dry: Solvent
Shelf Life 12 - 18 months
Store Below 35 C
Application Temperature 5 C - 35 C
Application Low-pressure sprayer, brush or roller
What's in the box
1 x 20 Litre
