Tough Primer Waterbased Red Oxide is a waterbased anti-rust primer that can also be used as a protective paint on its own (two coats required). This makes it a practical and cost-effective solution for metal roofs and steelwork.
Developed with an industry-leading laboratory, this product uses an adhesion-promoted acrylic emulsion and multiple rust inhibitors to help stop rust and improve the lifespan of your coating system.
Why Choose Tough Primer Waterbased Red Oxide?
- Can be used as a primer or as a standalone protective paint (two coats required)
- Developed with an industry-leading laboratory
- Adhesion-promoted emulsion for strong grip on metal
- Multiple rust inhibitors to help control corrosion
- Waterbased - easy to apply and easy to clean up
- Suitable for brush, roller or airless spray
Where Can It Be Used?
- Corrugated iron and IBR roofs
- Steel gates, fences and railings
- Metal frames and general steel structures
- Maintenance repainting of older, weathered metal surfaces
Surface Preparation
- Make sure the surface is clean, dry and free from loose rust, flaking paint, oil or grease.
- Remove all loose material before applying.
- Good preparation ensures better adhesion and longer-lasting results.
- Use a universal undercoat first if you paint over solvent based paints
Application Guidelines
- Stir well before use
- Do not apply below 10 C or above 35 C
- Avoid application if humidity is above 80%
- Do not apply if rain is expected within 2 hours
- Allow at least 4 hours before recoating
- Apply two coats if used as a standalone paint
Technical Information
- Type: Adhesion-promoted acrylic emulsion
- Colour: Red Oxide
- Finish: Sheen
- Surface dry: 30-60 minutes
- Recoat time: Minimum 4 hours
- Spread rate: 5-8 m per litre (surface dependent)
- Clean-up: Water
What's in the box
1 x Tough Waterbased Primer - Red Oxide
