1. Features high-gloss epoxy colored sand floor paint for a luxurious, seamless marble effect. Delivers a smooth, refined surface with unique simplified cleaning properties enabling rapid project completion and long-lasting durability. Eye-catching veining patterns perfectly elevate the aesthetic of any space.
2. The self-leveling epoxy floor paintdelivers exceptional longevity. Whether protecting garage floors from hot tire marks and oil stains or keeping basements dry, this epoxy coating serves as your robust shield.
3. Designed for easy mixing and smooth application with outstanding leveling properties. Renovate your floor rapidly with minimal wait time. Scratch-resistant, impact-resistant, wear-resistant, and heavy-duty load-bearing. Delivers a resilient, long-lasting coating that withstands daily wear and tear, maintaining its fresh appearance over time.
Step 1: Surface Preparation
- Clean: Degrease the concrete thoroughly to remove any oil, wax, or contaminants.
- Profile: Mechanically grind the cementitious surface or use acid etching. The cementitious must feel like medium-grit sandpaper to allow the epoxy to bond permanently.
- Vacuum: Remove every trace of dust and debris before starting.
Step 2: Apply the Primer Coat
- Mix: Blend a small batch of clear liquid epoxy (Resin primer and Hardener primer only).
- Roll: Apply a thin layer across the floor using a roller to seal the porous cementitious substrate. This prevents air bubbles from rising into your main sand layer. Let it sit until tacky.
Step 3: Mix the Epoxy Color Sand Slurry
- Blend Liquids and Sand: Pour Part A (Resin) and Part B (Sand) into the large central mixing bucket. Mix thoroughly for 3 minutes using a drill with a paddle mixer on low speed. Scrape the bottom and sidewalls of the bucket frequently, until the sand is completely wet out and forms a uniform, paste-like consistency.
Step 4: Spread and Level
- Pour: Immediately pour the mixture out onto the floor in long rows or ribbons. The mixture covers upto 10 - 14 square meters. Do not leave the mixed slurry in the bucket, or it will rapidly overheat and harden.
- Trowel: Use a flat steel scrapper to flatten and tightly compact the color sand mix across the floor to your desired thickness.(1mm thickness covers 14square meters & 2mm thickness covers 10square meters, for a less busy area we suggest 1mm thickness and for a busy area we suggest 2mm thickness)
- Roll: Put on spiked shoes and run a spiked roller over the wet surface to pop trapped air pockets/bubbles and settle the sand evenly. Allow the floor to cure for 24 hours.
Step 5: Apply the Clear Lock/Topcoat
- Sand Lightly: Once the sand layer is fully cured, scrape or sand away any rough, protruding sand grains, then vacuum the dust.
- Seal: Mix and apply a final coat of clear, UV-resistant epoxy topcoat with a high-quality squeegee or roller. This seals the textured sand, making the floor easy to clean while maintaining slip resistance.
What's in the box
1 x Roller
1 x Scrapper
1 x Epoxy hardener 2,5kg
1 x Epoxy sand 17,5kg
1 x Primer A 800g
1 x Primer B 2,5kg
1 x 20l bucket
