Suitable for the EC Temp meter E50 Pro. Please refer to the User Guide for instructions on how to replace the electrode. Waterproof IP67.
Replacing the electrode:
1 Properly unscrew the sealing ring in the lower part of the meter.
2 Remove the defected/old electrode by gently pulling it.
3 Carefully place the new electrode with the recess in the correct position so that the connectors properly connect and do not damage the meter or electrode.
4 Check that the rubber seal is properly placed.
5 Tightly tighten the sealing ring.
6 Calibrate the meter as described in this manual.
7 The meter is now ready for use.
What's in the box
1 x Aqua Master Replaceable electrode E50 pro
