Put the batteries on. When you click the remote control, the machine beeps and the green light turns on. Indicates that the alarm is ready to go into operation.
3.15 seconds later, if a person enters the detection area of the infrared alarm, the red light flashes for 5 seconds. In this 5-second delay time, it is convenient for the owner to turn off the alarm with the remote control. After 5 seconds, if you do not receive the signal of the remote control, it will emit a harsh alarm sound for 30 seconds, and the alarm volume is 105 DB. 15 seconds after the end of the alarm sound, if someone touches the remote control infrared alarm, it will alarm again, repeat
.2. In the remote control infrared alarm, you can use the remote control to close the detection circuit and end the alarm.
Installation method:
one Fix the gimbal about 2 meters from the ground
3. Open the battery cover and load the 4 # 7 batteries according to the signs on the inside of the battery box
4. Fix the remote infrared warning device on the universal base, turn the infrared warning device to meet the installation requirements and detection needs.
-Human body temperature detection.
-Ultra long-distance multi-channel wireless remote control.
-The infrared receiving head with an iron shell shield is adopted.
-Super loud volume alarm (alarm sound over 110 decibels).
-Alarm only, other accessories demo in the picture are not included.
-Technical parameter
-Alarm sound level: 110dB (decibels)
-Remote control distance: about 10-15 meters (open area)
-Detection range: detection distance is about 5-6meters
-Working voltage: DC 6V-18V wide voltage or battery
-Material: Plastic
-Powered by: 4 x AA batteries (Not included)
-Applications: Family security, factory security and others
What's in the box
1 x Alarm Sensor
2 x Remote Control
1 x Bracket
