I. Core Product Information
Product Name: Wall-Mounted PTC Ceramic Electric Heater
Rated Power Supply: 220V~50Hz
Heating Method: PTC Ceramic Heating
Control Method: Dual control via body buttons and remote control
Timer Range: 1~8 hours
Installation Method: Wall-mounted (can also be placed horizontally)
II. Core Functions and Technical Features
1. Highly Efficient and Safe PTC Heating Technology
Utilizing PTC ceramic heating elements, it features rapid heating, high thermal efficiency, no open flame, and no oxygen consumption. It operates odorlessly and with low noise, providing safer heating.
The flameless combustion design avoids the fire hazards of traditional heating equipment and does not consume indoor oxygen, ensuring a comfortable and dry environment.
2. Multiple Safety Protection Systems
Automatic Overheat Protection: The device has a built-in overheat protection device. When the air inlet/outlet is blocked or the device temperature rises abnormally, it will automatically cut off the power to prevent equipment damage or safety accidents.
Delayed Cooling After Power Off: After the device is powered off, the fan will continue to run for approximately 30 seconds, blowing cool air to cool the internal heating elements, preventing residual heat from damaging parts and extending the device's lifespan.
Flame-Retardant and High-Temperature Resistant Body: The outer shell is made of high-temperature resistant and flame-retardant plastic material, reducing the risk of fire during high-temperature use.
3. Convenient Intelligent Control
Dual Control Operation: The unit features an LED digital display panel and physical buttons, along with an independent remote control, supporting remote operation. Temperature adjustment and timer settings can be easily adjusted even while lying down.
Timer Function: Supports 1-8 hour timer shutdown. Pre-set preheating or automatic shutdown before bedtime eliminates the need for overnight power, making it more convenient.
III. Wall Mounting Installation Guide (with Dimensions)
1. Installation Location and Drilling Size
Installation Location: 2 meters above the ground, near a corner ( 20mm from the corner).
Drilling Spacing: The center distance between the two mounting holes is 558mm. The hole diameter must match the expansion tube diameter.
Installation Steps:
1. Drill holes at the marked locations and insert expansion tubes.
Screw in two screws, leaving approximately 10mm of screw head length.
Align the hanging holes on the back of the device with the screws and hang the device securely.
2. Installation Precautions
The device must be hung on a sturdy wall to ensure a secure installation and prevent it from falling.
Do not install near water sources (such as directly below a shower head). Keep away from water splashes when using in the bathroom.
Do not place curtains, furniture, bedding, or other flammable items under the device; maintain a safe distance of at least 50cm.
IV. Detailed Instructions for Use
1. Initial Use Procedure
Confirm that the device is securely installed (or placed horizontally and stably), and that the air inlet/outlet is unobstructed.
Plug the power cord into a compatible socket (with grounding protection, rated current 10A).
The power indicator light will illuminate after the device is powered on. The device can be turned on using the buttons on the unit or the remote control.
Adjust the power level and temperature to activate the heating mode; a timer can also be set to turn off the device as needed.
2. Power-Off Procedure
First, press the power button on the unit/remote control to turn off the heating function.
The fan will automatically run for approximately 30 seconds, blowing cool air to cool the internal components.
After the fan has completely stopped running, unplug the power cord.
3. Remote Control Instructions
The remote control requires AA batteries and is paired with the unit; no additional setup is required.
Supported functions: power switch, temperature/speed adjustment, timer setting, etc.
What's in the box
1 x Wall-mounted heater
1 x remote control
1 x Manual
