Product Description:
This metal detector is ideal for those who are looking for a serious entry-level machine. With your metal detector, you can hunt for coins, relics, jewelry, gold, and silver just about anywhere. This metal detector is versatile and easy to use.
The detector improves weight and size, makes it easy to carry and place.
Applications:
Detecting metal objects buried underground. Widely used in security check, treasure hunting, material check etc..
Features:
1. Two Operation Modes: All Metal, Disc
2. Volume - To adjust the volume level of speaker and headphone (not supplied) .
3. View Meter and Pointer - The meter pointer swings to the right if metal is found.
4. Waterproof Search Coil - Lets you search for metal objects under shallow water.
5. Adjustable Stem - Lets you adjust the detector's length.
Specifications:
1. Power: 2 x 9V Batteries (6F22) (Not included)
2. Frequency: 5.0 KHz
3. Current: Standby: 10mA,Max: 70mA
4. Sensitivity: 15cm (for a US Quarter coin)
5. Indication Mode:Mechanical Indicator Mode, Sound Mode
Assemblingthe Detector:
Assembling the detector is easy and requires no special tools. Just follow these steps.
1. Unserew the knobs on the search coil and remove the knobs and theconnector. Insert the smaller stem and align the holes on the search coil bracket and the stem. Push the connector through the holes, then replace and tighten the knobs.
2. Loosen the stem's lock nut (connected with the handle) in the direction of the arrow. Then insert the smaller stem into the big stem conected with the handle. Tum the stem's lock nut in the reverse direction of the arrow to lock it in place.
3. Insert the latch on the top of the handle into the assembly hole on the bottom of the control box. Then slightly push the control box in the direction of IN on the handle to fix the latch in place.
4. Tighten the fixing screw.
5. Insert the search coil cable plug into the five pin jack on the front control box's housing.
6. Lengthen or shorten the stem, so when you stand upright with the detector in your hand, the search coil is level with and about 5~2inches/ 1~5cm above the ground. After that tighten the lock nut.
Caution:
The search coil cable plug fts into the conector only one way. DO NOT force the plug or you could damage it.
DO NOT disassemble the stem lock nut. In case you disassemble it, place the w asher on the top of the stem connected with the handle with the small head of the washer upwards. Then hitch the stem lock nut on the washer then tighten it to lock it in place.
Adjusting Th E Search Coil:
Loosen the knobs at the search coil's end, adjust the search coil to the desired angle. The search coil should be parallel w ith the ground. Tighten the knobs just enough to keep the search coil from rotating or wobbling.
What's in the box
1 x Metal Detector
1 x User Manual
