Product Parameters
Color: Black
Material: Aluminum Alloy
Input Voltage: AC110V/240V 50/60Hz
Rated Power: 500W
LED Beads: 3 x 3-in-1 High-power LED Beads
Control Protocol: 433MHz
Effective Control Distance: Approx. 15m
Control Method: Remote Control
Heating Time: Approx. 2-3 mins for first preheating; Approx. 20 secs for each subsequent cycle
Smoke Ejection Duration: 17-22 secs
Smoke Projection Distance: 2-3m
Oil Tank Capacity: 260ml
Continuous Spraying Time: Approx. 1 hour
Protection Grade: IP30
Working Environment: -10 -45
Product Weight: 2kg
Product Dimensions: 271818cm
Key Features
One remote control for easy operation, free switching between smoke emission and LED light modes.
Independent control of LED light colors and smoke ejection for flexible effect adjustment.
Equipped with a preheating indicator light that turns on when preheating is complete, ready for immediate smoke emission.
Double-layer temperature control protection design for safer use.
Safety Warnings
Caution: Improper battery installation may cause an explosion. Replace only with the same or equivalent battery type.
Controller Battery Warning: Do not dispose of used batteries with household waste; recycle them at designated collection points. Improper battery replacement may cause an explosion. Do not mix new and used batteries. Keep the device out of reach of children if the battery compartment is not closed properly and stop using it immediately.
Child Warning: The supplied remote control contains button cells. If swallowed, it may cause severe internal burns or even death within 2 hours.
If you have any concerns (e.g., battery swallowing or entry into other body parts), contact a doctor immediately. Disconnect the power supply before cleaning the device; do not use abrasive cleaning agents. Wipe dust or dirt off the product with a clean cloth. We are not liable for any damage caused by improper operation, misuse or normal wear and tear. We reserve the right to make technical modifications.
For environmental protection and human health, waste products should be recycled in a responsible manner to support sustainable development.
Operation Steps
Open the oil tank cap and add specialized smoke fluid only.
Plug in the power cord and turn on the device.
Wait 2-3 minutes until the red indicator light on the machine illuminates, then press the smoke button on the remote control to activate.
Important Safety Notes
The machine remains hot during operation. High surface temperature is normal - do not touch with bare hands.
Use the device in a dry location. No liquids other than the specified smoke fluid should enter the machine. If accidental leakage occurs, turn off the power immediately and wait for the machine to dry completely before reuse.
Keep the device away from flammable and explosive materials at all times.
Refill smoke fluid immediately when the tank is nearly empty, as running the machine dry will cause permanent damage.
Do not touch the smoke outlet or the bottom of the machine while it is running to avoid burns.
Allow the machine to cool completely before packing and storing after use.
Turn off the machine when it is not in use or unattended.
What's in the box
1 x Smoke Machine
1 x Handle
1 x Power Cord
2 x Handle Screws
1 x Remote Control
1 x User Manual
