Top Paints Flexi Seal Waterproofing with 10 metre roll membrame: Highly effective in sealing and preventing roof leaks
Features:
- Water repellent
- Excellent flexibility
- Roof and Paving adheres well to it
- Available in Grey, red and Green
- 100% Lead Free
- Used in conjunction with membrame
Specifications:
- Drying Time: 2 Hours
- Recoating Time: 2 Hours
- Application: Brush or roller
- Thinning: Not recommended
- Spreading Rate: 2 to 3m square metre per litre with membrane and 4 to 5 square metre per litre without membrane which is not recommended
- Cleaning: Water
- Coats: 2 or more, completely covering the membrane and allow to dry between coats
- Stir thoroughly before use
- Do not paint early in the morning or late afternoon, as the roof may be covered in dew or frost, especially during winter months
- Do not paint on extremely hot days as small bubbles or Heat Blisters may form and weaken the film
Surface preparations:
- All surfaces must be clean, dry, sound, free from grease, oil, dirt and other surface contaminants
- New Surfaces – New Flatdecks and roof tiles: Ensure that concrete or roof tiles are dry and free of dust and other surface contaminants
- Remove mould and algae, rinse thoroughly and allow to dry
- Flexi Seal and membrane should be applied to all cracks, expansion joints and 90 degree joints
- Apply 1 coat Flexi Seal liberally to all areas where membrane will be placed
- Dab the membrane in to the Flexi Seal by using the brush
- Apply the membrane in sections of 30 to 40 centimeter at a time ensuring that the Flexi Seal is still wet
- Apply 2 coats over the membrane, allow sufficient drying time between coats
- Cement Plaster Parapets: With a soft bristle broom brush down the parapets
- Apply 1 coat of Plaster Primer and allow to dry if new
- Apply 1 coat Flexi Seal liberally to all areas where membrane will be placed
- Dab the membrane in to the Flexi Seal by using the brush
- Apply the membrane in sections of 30 to 40 centimeter at a time ensuring that the Flexi Seal is still wet
Apply 2 coats over the membrane, allow sufficient drying time between coats
New Galvanised Iron: Clean with Degreaser to remove fabricator’s pre-treatment oil, grease and other contaminants
- Rinse with clean water until water break-free film is achieved, allow to dry
- Prime with Top Paints’ Water-based Zinc Phosphate Primer the same day and allow to dry
- Apply 1 coat Flexi Seal liberally to all areas where membrane will be placed
- Dab the membrane in to the Flexi seal by using the brush
- Apply the membrane in sections of 30 to 40 centimetre at a time ensuring that the Flexi Seal is still wet
Apply 2 coats over the membrane, allow sufficient drying time between coats
Weathered Galvanised Iron: Remove any rust by means of wire brush, sandpaper or abrasive blasting
- Prime with Top Paints’ Water-based Zinc Phosphate Primer the same day and allow to dry
- Apply 1 coat Flexi Seal liberally to all areas where membrane will be placed
- Dab the membrane in to the Flexi Seal by using the brush
- Apply the membrane in sections of 30 to 40 centimeter at a time ensuring that the Flexi Seal is still wet
Apply 2 coats over the membrane, allow sufficient drying time between coats.
Previously Painted Surfaces
- Old Flatdecks: Remove previous system, where adhesion has been lost
- Wash surface in order to remove dust and other surface contaminants
- Allow to dry
- Flexi Seal and membrane should be applied to all cracks, expansion joints and 90 degree joints
- Apply 1 coat Flexi Seal liberally to all areas where membrane will be placed
- Dab the membrane in to the Flexi Seal by using the brush
- Apply the membrane in sections of 30 to 40 centimeter at a time ensuring that the Flexi Seal is still wet
Apply 2 coats over the membrane, allow sufficient drying time between coats
Previously painted with Bitumen Aluminium:
Remove all Bitumen Aluminium and treat as new work
Previously painted with Emulsion paint:
Clean surface and apply directly
Storage
- Store away from direct sunlight, heat and severe cold
Keep container sealed and avoid moisture contact
Caution
During Winter months painting should be restricted to between 09H00 and 15H00, in Summer painting can be done between 08H00 and 16H00
- Exterior surfaces – Do not paint if rain is imminent
What's in the box
1 x Can of Paint
1 x 200mm roll of 10meter Membrame
