Fully automatic three-point safety belt universal retractable safety belt for passenger cars, buses, and trucks
Core design: A critical safety device specifically designed for front seats in vehicles.
Key Parameters:
Webbing net length: Approximately 3 meters (total length approximately 3.12 meters)
Retractor base length: Approximately 30 centimeters
Installation Requirements (Critical!):
Vertical Mounting: The retractor must be mounted vertically relative to the ground during installation.
Pre-test Locking: Pull out the webbing before mounting to confirm it locks reliably.
Protective cardboard plug: Do not remove the cardboard plug before securing the retractor to the ring-shaped guide rail!
Troubleshooting (when not functioning):
Secure the retractor vertically.
Gently retract the webbing by hand.
Slowly and evenly pull again to test.
Important Safety Warning (Strictly Prohibited!):
Absolutely do not remove the spring cover! This action will:
Cause permanent damage, rendering the retractor inoperable.
Hazardous, posing a serious threat to occupant safety!
What's in the box
2x 3-point Retractors
2x 30CM Steel Wire Base
2x Safety Belt Clips
8x Screws
1x Box
