The TES-45 LAN-1 Cable Tester is designed for testing opens, shorts reversed, crossed and split conditions in miss-wired cable installations. It is designed to work with various data cables and connectors, including 10BaseT, 100BaseT, Coax, etc. This cable tester provides a quick go/no-go LED display of the wiring and connection of the item under test. You can either step through the test cable wiring one at a time or have the unit automatically pulse through the pin-outs and display the results.
Specifications:
Cable types tested: 10/100 base-T; 10 base-2; RJ45; AT&T 258A; EIA / TIA 568A/568B
Continuity maximum length: > 300 meters
Connector types: RJ45, BNC
General:
Verify the cable wiring for continuity, opens, shorts or incorrect wiring.
Test installed cable on the wall plate or the patch panels by using the remote termination module.
Perform loop-back test or remote test.
Connector types: RJ45, BNC.
What's in the box
TES45 LAN Cable Tester, Instruction manual, One patch cable (RJ-45 to RJ-45, 30cm long) & one remote identifier
