UNILIFT AP12.50.11.3
Submersible drainage pump type
Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 3-phase totally enclosed motor in insulation class F. The pump is fitted with a suction strainer.
The impeller is a SEMI OPEN impeller for 12 mm free passage suitable for pumping groundwater, surface water, rain water and similar.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings.
The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.
Liquid:
Liquid temperature range: 0 .. 55 C
Selected liquid temperature: 20 C
Density: 998.2 kg/m
Technical:
Maximum flow: 8.89 l/s
Type of impeller: SEMI OPEN
Max. Particle: 12 mm
Approvals: CE,RCM,LGABG,EAC,TUVRHWID,MORO,UKCA,CNROHSEXP,SEPRO
Materials:
Pump housing: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Cable union: Brass
CW602N
C35330
Installation:
Range of ambient temperature: 0 .. 55 C
Type of connection: Rp
Size of connection: 2 inch
Maximum installation depth: 7 m
Place of installation: Indoor/outdoor
Electrical data:
Power input P1: 1.9 kW
Rated power - P2: 1.2 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 400 V
Rated current: 3.2 A
Cos phi - power factor: 0.88
Rated speed: 2785 rpm
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of power cable: 10 m
Type of cable plug: NONE
Others:
Net weight: 16 kg
Gross weight: 17 kg
Danish VVS No.: 391314112
Swedish RSK No.: 5880114
Country of origin: HU
Custom tariff no.: 84137025
Environmental approvals: WEEE
What's in the box
1 x Pump
1 x Manual
