Smart Battery Trickle Charger for 6/12 Volt Batteries - 6.5 Amp

Intelligent battery charger with microprocessor control

9 Steps intelligent charging cycle; 6V/12V selection

Low battery activation voltage(1.5V)

Suitable battery style: STD, GEL, AGM, LITHIUM

Reverse connect protection, short circuit protection, over charger protection, over-temperature and Fire protection functions

Special safety design, no output on clips when it not connect to the batt

Memory charging function

LCD Screen; LCD display fault information

Charging current selection: AUTO/2A/4A/6.5A

Automatic charging current selection

Independent winter and AGM charging mode

12V Recover battery mode, and Lion battery charging mode

Special current supply function. Like DC output equipment base on 13.6V, 3A output.

IP65

Input: AC 220-240V,50-60Hz, Max 120W

Output: DC 6V / 6.5A, DC 12V/6.5A

DC Supply Function: DC 13.6V, Max 3

For use on lead acid, GEL,AGM, 12V Lithium (LiFePO4) batteries.

1. Desulphation

Detecting sulfureted batteries, then remove sulfuret from the lead plates of the battery by Pulsing Current and Voltage.

2. Constant Current

Charging battery to 25% capacity by Current.

3.Constant Current

Charging battery to 50% capacity by max Current.

4. Constant Voltage

Charging battery to 75% capacity by Constant Voltage.

5. Analysis

Analyzing power capacity, if can not store power the battery should be replaced

6. Recond

Restores power capacity in a stratified battery to sustain ultimate battery life.

7. Float charge

Charging battery to 100% capacity by small current.

8. Diagnosis

To check if battery has been fully charged

9. Maintenance

The charger will use small current to keep battery always be fully charged.

Mains supply: 220-240V, 50Hz

Charging Voltage: 6V/12V

Battery Capacity: 1.3-200 Ah

Charging Current: 0.8A,2A, 4A,6.5A

Activation Voltage: 1.5V

Battery Type: STD, GEL, AGM, LITHIUM (LFP)

What's in the box
1 x Charger