Rust-Oleum Specialty Appliance Epoxy is a one-component, very hard, moisture-resistant enamel that is specifically formulated for indoor metal surfaces. It provides a smooth, washable surface for refinishing the exterior of appliances such as refrigerators, dishwashers, laundry machines, dryers and other indoor metal applications such as tables or cabinets.
PAINTING CONDITIONS
Appropriate for use on the exteriors of appliances. Not intended for continuous water immersion or surfaces, that, when heated, exceed 200 F (93 C). Priming is not recommended. Do not use on objects exposed to heat such as stovetops, oven interiors, etc.
SURFACE PREPARATION
Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces. Clean with soap and water, rinse and let dry
APPLICATION
Apply when temperature is between 50-90 F (10-32 C) and humidity is below 85% to ensure proper drying. Before using, mix thoroughly to ensure any settled pigment is re-dispersed. If thinning is necessary, thin the material with mineral spirits or acetone only. For small areas, use a good quality brush and apply light, even coats to ensure an even flow and finish. For large surfaces, use a good-quality foam roller that is designed to give a smooth finish. Do not use near open flame.
COVERAGE
One quart of Specialty Appliance Epoxy will cover 120 square feet with 2 coats if applied on an average refrigerator.
DRY and RECOAT TIMES
Based on 70 F (21 C) and 50% relative humidity. Allow more time at cooler temperatures. Dries to the touch in 2-4 hours, to handle in 5-9 hours and is fully dry in 24 hours. Appliance Epoxy may be recoated within 1 hour or after 24 hours.
CLEAN-UP
Clean the roller and other application tools immediately with mineral spirits. Properly discard empty containers.
What's in the box
1 x Rust-Oleum Speciality Appliance Epoxy 946ml
