Description:
-Replace your faulty or damaged Playstation 4 Analog Stick Component / Module / Switch without the need to buy a replacement controller.
-Have a non-properly working joystick? Don't worry! This kit is the perfect solution to make your controller working like new again.
No need to spend a R1000 or more for a brand new controller.
-Tiny analog stick that can solve many problems under professional installation: Stick drift, creeping, stuttering, blind spots, dead zones, no click, non-centered, broken, loose joysticks and etc.
-Smooth linear taper on joystick sensors, no sudden transitions, quality controlled to 5% tolerance
-Smooth 360 degree action, no binding in corners, clean return to center.
-Crisp toggle press switch.
-Please Note:You will need basic soldering skills along with soldering tools and other basic tools or get it installed by a professional installer.
-Compatible with Playstation 4 Original Controller.
Features:
Compatible Model: for Playstation 4 Original controller.
This 3D Analog Sensor Module is used for fixing your controller.
It will make your controller work normally again
Professional installation is highly recommended, instruction or tool is not included.
Important Note:
This item comes with No Manual , No Instruction Guide, No Video Guide. Professional installation skill is needed.
We do not hold any responsibility for damaging of this item cause by your wrong installation or your wrong purchasing.
These are non returnable once soldered. If you heat them up too much , the insides distort and they will not work .
If you don't heat them up enough , using Flux and correct temperatures , you will get a cold solder joint , and they will not work.
What's in the box
1 x Analog Sensor Module
1 x Thumbstick Cover Cap
