The UTG P.O.I. Scope Rings - 34mm are the finishing touch to your rifle and optic combination. The Innovative P.O.I (Precision Optics Interface) addresses three of the most critical areas in scope rings: the inner ring surface, zero hold, and recoil displacement. The inner ring surface is precisely, progressively machined to achieve a seamless ring to scope attachment. The mount features a low profile and flush-fitting locking side plate controlled by dual spring-loaded guide rods interfacing with the rail, secured with Torx screw locking to ensure a secure and repeatable zero hold. Additionally, a square-shaped integral recoil stop interfaces with a Picatinny slot via complete surface contact to eliminate the possibility of forward and aft movement from recoil vibrations. This ringset contains a two-piece ring set, each equipped with four top Torx screws, designed with a 22 mm ring width, compatible with Mil-spec 1913 Picatinny Rail Platforms. Manufactured from 6061-T6 Aluminum Alloy and 4605 Steel, and finished with an anodized matte black hard coat, these rings are rated for use with .50 BMG calibers.
Features
- Seamless attachment to optics
- Compatible with Mil-spec 1913 Picatinny rail
- Proudly made in the USA
- Matte black hard coat finish
- Low profile design for optimal mounting
- Lightweight construction
- Precision-machined for tight tolerances
- Square-shaped integral recoil stop for stability
- Two-piece ring set with Torx locking screws
Specifications
- Material: 6061-T6 Aluminum and Steel
- Number of Pieces: 2
- Rail Type: Picatinny
- Color: Black
- Maximum Scope Outer Diameter: 63 mm
- Screws Per Ring: 4
- Profile Level: Medium
- Caliber Rating: .50 BMG
- Torque Specifications: 25 inch-lbs (T25 Torx, ring cap), 35 inch-lbs (T25 Torx, side plate)
- Center Height: 3.2 cm
- Inner Diameter: 3.4 cm
- Ring Width: 2.2 cm
- Saddle Height: 1.5 cm
- Width: 5.07 cm
- Weight: 0.075 kg per ring
What's in the box
1 x Picatinny Ring
