Pin Definition:
3V3-----Input power supply voltage (3.3,5V is recommended but not recommended)
Gnd-----grounding point
Sio_C---Control clock of SCCB interface (Note: Some low-level microcontrollers require pull-upcontrol, similar to I2C interface)
Sio_D--- Serial data input (out) side of SCCB interface (Note: Some low-level microcontrollers need pull-up control, similar to I2C interface)
Vsync---frame synchronization signal (output signal)
Href----Line synchronization signal (output signal)
Pclk----pixel clock (output signal)
D0-D7---Data port (output signal)
Reset---Reset port (normal use pull up)
Pwdn----power consumption selection mode (normal use low)
For OV7670 with fifo please contact us
Key Parameter:
(1) Photoreceptor array 640X480;
(2) Io voltage 2.5V to 3.0V (internal Ldo power supply to the core 1.8V);
(3) Power operation 60mW/15fpsVgayuv;
(4) Sleep <20 A;
(5) Temperature operation - 30 C to 70 C;
(6) Stable operation 0 C to 50 C;
(7) Output format (8-bit); Yuv/YCbCr4:2:2 RGB565/555/444 GRB4:2:2 Raw RGB Data Light
(8) Size 1/6"
(9) Field of View 25
(10) Maximum rms rate 30fps Vga Sensitivity 1.3V/(Lux-sec);
(11) Signal to Noise Ratio 46 dB;
(12) Dynamic Range 52dB
(13) Browsing mode line by line;
(14) Electron exposure 1 line to 510 lines;
(15) Pixel area 3.6 m x 3.6 m;
(16) Dark current 12 mV/s at 60 C;
What's in the box
1 x OV7670 Camera Module
