Eaton's Bussmann series NH horizontal fuse switch disconnectors are specifically designed to be used with NH fuse links. All energised metal parts are fully protected against accidental contact. These are manually operated switches and the making and breaking is dependent on the speed of the operation. The EBV range is provided complete with the clamps (i.e. screws/V-terminals/2V-terminals) and cable for shrouds for cable termination.
Standard features
Touch for IP 30 from the front
Top/bottom cable termination possibility
Test holes provided on the cover to measure the voltage across the link
Various options for cable terminations
Wide range of accessories
Standard/Approvals:
IEC 60947-1 and 3
EN 60947-1 and 3
Compatible fuse links:
NH 400, 500 and 690 V NH gG and aM fuse links
Technical data
Voltage: 400, 500 and 690 V a.c.
Current: 160 to 1600 A
Utilisation category:
AC21B Size 4
AC22B Sizes 00 (V 120), 1-S, 3, 4
AC23B Sizes 00 to 2
DC21B Sizes 00, 2 and 3
DC21B Sizes 00, 1 and 2
Functionality
Designed for installation onto mounting plates, 60 mm or 100 mm busbar systems
Making and breaking operation should be done with determined movement
Parallel moving, double contact system
Suitable for top or bottom cable terminal connection
Operating conditions
Suitable for installation in environments free of any dust, explosive or aggressive gases
Altitude up to 2000 metre above sea level
Can be used in outdoor environments if they are installed in IP34 cabinets
Relative air humidity should not be higher than 50% temperature of +40oC
Ambient temperature from -25oC to +55 degrees C
Mounting options
On mounting plates
EBH00 O, EBH1 O, EBH2 O, EBH3 O
On to busbar systems
60 mm busbar systems: EBH00 1, EBH1 1, EBH2 1 installation on to busbar system with hooked clamps
100 mm busbar systems: EBH2 2, EBH1 2 installation on to busbar system with hooked clamps
What's in the box
1 x Fuse holder
2 x 160A NH00 fuses
