Instant and Precise Readings: It reads to a depth of approximately 12 mm into the slab. Plus, the current reading can be captured via the hold function
Four Measurements: Easily set the wood species from hardwood to softwood you need to measure. Offers a relative moisture content (comparative) measurement
No More Smoky, Slow burning Fires: Quickly, easily and affordably find out if pieces of firewood are ready to burn at the woodpile before carry it in
Tips one: Why it read 0%, when the wood slab was too dry to register readings,the wood at this moment is an insulator leading to a non-conductive between the two pins
Tips two: For best results of wood moisture content, push the pins deep into the material, make sure pins are in contact with the material( wall, wood or hardwood)
Tips three: Pins sense and measure along their full length, so that Pins penetrating a dry material through a wet outer surface can read moisture content
Longer Battery Life: Low power requirements enable up to 500 tests on one set of AA batteries
This unit is an advanced tester for measuring the moisture content of wood whose thickness is less than 20 mm. It features the LCD, the back-light, low power indication, and direct reading.
Features:
Two metal contacts on the protective cover. Touch the two probes to the contacts for adjustment
value.
It has 7 measurement ranges, a wood species can only be measured in a definite range.
The display shows the ambient temp.
In the protective cover, there is an adjustment part that can be used to determine whether the unit in
a good condition.
It is compact, easy to carry and use. Auto power-off function.
Specifications:
Range 5 ~ 42 %
Resolution 1 %
Temperature 0 ~ 40 C
What's in the box
1 x 1 Moisture Tester for Wood
What's in the box
1xMoisture Tester for Wood 1x User Guide
