EconoReset with Pushbutton, Active-Low, 1V-5.5Vin, SOT-23-3
Product Overview
The DS1818R-10+T&R is an EconoReset Supervisory Circuit with pushbutton. The DS1818 EconoReset uses a precision temperature-compensated reference and comparator circuit to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal power-fail signal is generated which forces reset to the active state. When VCC returns to an in-tolerance condition, the reset signal is kept in the active state for approximately 150 ms to allow the power supply and processor to stabilize. The DS1818 also monitors a pushbutton on the reset output. If the reset line is pulled low, a reset is generated upon release and the DS1818 output will be held in reset output low for typically 150ms.
Improves reliability of processor operation - Monitors pushbutton for external override
Efficient open-drain output with internal 5.5kR pull-up resistor saves power and space
Allows for easy design with no complicated settings
Applications
Industrial
Product Information
Threshold Voltage: 2.88V
No. of Supervisors / Monitors: 1Monitors
Supply Voltage Min: 1V
Supply Voltage Max: 5.5V
Reset Type: Active-Low
Digital IC Case: SOT-23
No. of Pins: 3Pins
Delay Time: 150ms
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
What's in the box
1 x EconoReset with Pushbutton
