The MTD8 is a 30A 16 On/Off Digital Programmable Timer that is easy-to-use, quick to set and will maximize your savings. When installing the MTD8 for the first time, press the reset button to activate the timer.
The introduction of a timer will improve your energy savings up to 66%. Switching the geyser off/on manually is not good practice as circuit breakers are not designed to be switched often and will eventually damage which can be costly to replace.
Note: Press Reset Button to activate timer (Only required when first installed).
Features:
- Din Rail Mounted
- Advanced weekly settings
- Repeat programs with 16 On/Off settings, 18 pulse settings, and a manual On/Off switch
- Lithium battery back up in the event of a power failure (Loadshedding will reduce the lifespan of the battery)
- Countdown Mode: Manual timer control
- Pulse Control: For applications like Bells & Sirens
- Manual button changes between Manual On/Off , On Auto and Auto Off
- Terminology: On (Always On), Off (Always Off), Auto On (Timer remains On until the next Off programmed setting) / Auto Off (Timer remains Off until next programmed On setting and turns Off as per programmed Off settings)
- Auto Off - Automatically turns the timer On and Off as per the programmed settings
- While programming any function, 30 seconds of inactivity will exit all setting menu
Additional Information:
- Voltage Rating: 220V - 240V AC 50/60Hz
- Voltage Limit: 10%
- Resistive Loads (Max): 30A (4400W)
- Minimum Interval: 1 minute
- Countdown Interval: 1 second - 99 minutes & 59 seconds
- 18 Pulse Intervals: 1 second - 59 minutes & 59 seconds
- Ambient temperature: -10 C ~ 40 C
- Ambient Humidity: 35%RH ~ 85%RH
- Weight: 150g
- Certification: IEC60730-1, IEC60730-2-7
What's in the box
1 x MTD8 Timer
1 x Instruction Manual
