The MT476 is a 690V AC/DC Voltage Tester and is designed to meet electrician's requirements for a multitude of applications. The tester operates without a switch and by simply placing the probes onto the circuit under test, the meter automatically turns on and displays the voltage on a 2000 count display and quick indication can be viewed on the analogue bargraph. The MT476 incorporates a Low Impedance Test, which induces a basic load of approximately 6k at 690 volts. The voltage tester can show the direction of the rotating field with three-phase systems. The applied voltage and the rotating field direction is shown on the LCD display, with corresponding rotating field direction L = anticlockwise and R = clockwise. The tester can be used as a Single Pole phase tester and measure continuity up to 400k plus RCD Test. The MT476 meets the CAT IV 600V and CAT III 1000V safety standards.
Features:
-CAT IV 600V and CAT III 1000V
-IP64 waterproof housing
-AC and DC Voltage 690V
-Rotary Field 400V
-RCD Test 30mA
-Continuity test to 200k
-Phase Rotation
-2000 Count LCD display
-Low Impedance test
-Built-in Flashlight
-Polarity Detection
-Rotary Field indication
Specifications:
Function; Range; Resolution; Accuracy
DC Voltage: 6 - 690V; 1V; (1.0% + 3 Digits)
AC Voltage: 6 - 690V; 1V; (1.5% + 5 Digits)
Rotary Field: 100 - 400V
RCD Test: 10mA/30mA
Continuity: Yes
AC Bandwidth: 50Hz - 60Hz
Digital Display: 2000 count
Bargraph: Yes
Polarity Indication: Yes
Overrange Indication: Yes
Low Input Impedance: <6k
Flashlight: Yes
Load Test with Vibration: Load Test with Vibration
Enclosure: Double injection IP64
Low Battery Indication: Yes
Batteries: 2 x AAA
Weight: 255g
Dimensions: 240 x 78 x 40mm
Safety Specs: IEC61010-1 CAT IV 600V
What's in the box
1 x MT476 Voltage Tester
1 x AAA Batteries
1 x Instruction Manual
1 x Test Probe Covers
