The MT403 is a 1000V Non-Contact Voltage Detector with dual ranges, a low measuring range down to 12 volts and a high measuring range from 12V to 1000V. Suitable for outlets or against wire insulation testing, this non-contact AC Voltage Detector has a switch to turn the unit on and a Green LED indicates it is working. There is a Red LED and an audible sound to indicate the presence of voltage. It has a rugged double moulded IP67 waterproof housing that can withstand a 2m drop. There is a bright built-in LED flashlight ideal for use in dimly lit areas.
Features :
- 12V to 1000V detection
- Thinner probe tip for working with socket outlets
- Green LED means Power on, flashing red LED with beeper means Voltage detected
- Two modes, green indicates high voltage mode, Yellow LED 12V Mode
- Flash and beep rate increases as the detector gets closer to the voltage.
- Power On/Off with silent mode
- IP67 waterproof and withstand a 2m drop-proof
Specifications:
Function : Range
- Power On Indicator: Green LED
- Flashlight: LED
- Non-Contact Voltage (NCV): Yes
- AC Voltage: 12V - 1000V
- Frequency: 50/60Hz
- Voltage Detector 100V -1000V: Red LED audible beep
- Voltage Detector 12V -1000V: Yellow then Red LED audible beep
- Voltage Detector Audible: Continuous Beep
- Enclosure: Moulded case
- IP Rating: IP67
- Low Battery Indication: Beep 3 times, switch off
- Batteries: 2 x AAA
- Weight: 55g
- Dimensions: 160 x 23 x 25mm
- Safety Specs: IEC61010-1 CAT IV 1000V
What's in the box
1 X Mt403 Voltage Tester
