Description
Luxcoat quick drying enamel is a high-quality, single-component, quick-drying protective enamel coating developed for professional, industrial, commercial, automotive, agricultural, construction, maintenance and general-purpose painting applications. It is designed to provide a smooth, attractive gloss finish while creating a protective coating over correctly prepared and compatible surfaces.
The product uses an oxidatively drying, one-component alkyd coating system and is designed primarily as a topcoat for atmospheric exposure and touch-up applications. According to luxor paints, it retains its gloss finish and is suitable for various industrial structures and other protective-coating applications.
Its quick-drying properties make it particularly useful in workshops, fabrication facilities, maintenance departments, body shops, agricultural environments and industrial operations where components need to be painted efficiently without unnecessarily long waiting periods.
Important - thinning and mixing
This is a single-component (1k) paint. It does not require a hardener or activator to cure.
Stir the paint thoroughly before use until the product is completely uniform.
If thinning is required for spray application, use only the type and quantity of thinner specified by the manufacturer's current technical data sheet.
Do not add lacquer thinners simply by assumption. Only use lacquer thinners if the product label or current luxor technical data sheet specifically confirms that it is compatible with this particular quick drying enamel.
This distinction is important because using an incompatible solvent can affect viscosity, drying, gloss, adhesion and the final coating.
Where can quick drying enamel be used?
This type of enamel is especially suitable for industrial metal products, maintenance work, construction applications and other correctly prepared surfaces. Luxor also describes its air-drying industrial enamel range as suitable over properly prepared metal and wood.
Depending on substrate preparation, primer compatibility and the manufacturer's technical requirements, typical applications can include:
Steel and fabricated steel
Mild-steel components
Properly primed aluminium
Wood and timber surfaces when properly prepared
Door frames and window frames
Steel doors
Metal gates
Fencing and railings
Burglar bars and security gates
Steel pipes and pipework
Structural steel
Steel posts, poles and supports
Trailers and trailer components
Truck components
Bus components
Commercial vehicle components
Chassis and underbody components where the coating system is suitable
Agricultural machinery
Tractors and farm implements
Industrial machinery
Workshop equipment
Tools and equipment
Steel cabinets
Metal shelving
Metal furniture
Fabricated metal products
Industrial structures
Construction equipment
Maintenance and repair projects
General diy metal and wood projects
For walls, masonry, plaster, concrete, galvanised steel, bare aluminium and other specialised substrates, do not claim universal direct application. These surfaces may require a specific primer or another coating system. The substrate and primer should be confirmed against the luxor technical data sheet before painting.
Surface preparation
Correct surface preparation is essential for good adhesion and a durable finish.
Before applying the enamel, the surface should be clean, dry and free from contamination.
Remove:
Rust oil grease dust dirt salt wax silicone loose paint flaking coatings other surface contaminants
Previously painted surfaces should be inspected carefully. Loose or poorly adhered paint must be removed. Sound existing coatings should be cleaned and, where appropriate, sanded to provide a suitable key for the new coating.
Bare steel should be cleaned thoroughly and should receive the appropriate primer when the coating specification requires one.
Aluminium, galvanised surfaces and other non-ferrous metals can require specialised preparation and primers to achieve reliable adhesion.
Wood should be dry, clean and appropriately sanded before painting. Bare or porous timber may require an appropriate primer or sealer.
Application
The paint should be thoroughly stirred before application.
The exact application method, thinning ratio, number of coats, flash-off time and recoating interval should follow the current luxor technical data sheet.
Depending on the approved application specification, quick-drying enamel is commonly suited to professional spray-finishing applications. Correct spray-gun setup and paint viscosity are important for achieving an even finish.
Apply controlled, even coats rather than attempting to achieve complete coverage with one excessively heavy coat.
Allow adequate drying between coats.
Actual drying performance can change according to:
Temperature humidity air movement coating thickness substrate temperature thinner used application method
Key product specifications
Product type: quick drying enamel
coating technology: alkyd-based coating
components: 1-component / single-pack coating
curing method: oxidative / air drying
finish: smooth gloss finish
primary function: protective and decorative topcoat
application category: industrial and general-purpose finishing
hardener required: no - single-component product
typical substrates: properly prepared metal, steel and wood, plus other substrates when used with an appropriate compatible primer/system
typical markets: industrial, commercial vehicle, agricultural, fabrication, construction, maintenance, workshop and general-purpose applications
primary benefit: fast drying with an attractive protective gloss finish
pot life: as a 1k coating, luxor states there is no pot-life restriction associated with mixing separate components.
Commercial vehicles, trucks and buses
Quick drying enamel can be particularly useful for suitably prepared commercial vehicle and equipment components where a 1k enamel system is appropriate.
Potential applications include suitably prepared truck, bus, trailer, chassis, equipment-frame and other commercial-vehicle components. The appropriate primer and coating system should always be selected for the particular substrate and exposure conditions.
For areas exposed to severe chemicals, continuous immersion, very high temperatures or unusually aggressive corrosion, a more specialised coating system may be required.
Industrial and agricultural use
The coating is also suitable for many industrial finishing and maintenance situations. Luxor specifically describes its quick-drying enamel as a protective coating suitable for a variety of industrial structures.
Typical projects can include machinery, farm implements, tractor components, equipment frames, steel structures, fabricated products, workshop equipment, steel cabinets, metal frames, pipes and general industrial components.
Important safety information
Use in a well-ventilated area.
Keep away from heat, sparks, open flames and other ignition sources.
Wear appropriate gloves, eye protection and respiratory protection where required, particularly during spray application.
Keep out of reach of children.
What's in the box
1 X 5LT QD Paint
