Bring out the natural beauty of your patio wooden deck, and outdoor furniture!
Oil impregnation for wooden surfaces in outdoor areas. Accentuates the natural flavour of the wood and sets exciting colour accents to the grain of the wood. Protect your wooden terrace and garden furniture from wind and weather!
LOBASOL DeckOil is based on vegetable oils and offers effective deep protection.
Deep protection against frost and moisture
Good penetration into the wood surface
Easy and safe application
Also suitable for impregnation of garden furniture
Applicable on smooth and grooved planks
The preceding use of LOBADUR DeckPrepare increases the durability of the oil application
Suitable for children’s toys as per EN 71-3
Range of use:
Suitable for wooden decks, patios, garden furniture and other objects made from wood that are used outdoors. Suitable for children’s toys, as the requirements of DIN EN 71-3 - “Migration of certain elements” are met.
Application
Optimum processing conditions at +15°C to +25°C, relative humidity 40% to 75%, material temperature +15°C to +25°C
- Do not apply to surfaces exposed to hot or strong sunlight, as the applied coating may dry too quickly. Do not apply if rain is expected within 3 hours of application.
- If in doubt, create a test area to determine compatibility, adhesion and appearance. The results may vary depending on the type of wood, especially with oily and resinous woods.
- Shake the contents well.
- Transfer material to a LOBATOOL varnish bucket before applying.
- Avoid drops falling on the surface, smooth out any drops directly with a brush.
- Observe general and, if necessary, product-specific occupational health and safety regulations.
Important Information!
Excess material must be completely removed during equalisation or buffing with a cloth. Drying delays are possible on some exotic timbers.
Very Important - Keep oil-soaked cloths, pads and other tools in closed steel containers. Moisten oil in combination with sanding dust, fabric cloths and so on with water or store in a sealable bucket and dispose of in a Fire-Safe manner, since otherwise there is a risk of Self-Ignition of the cloths, buffing pads and sanding dust.
Thinner
The product is ready for use and must not be reduced!
Application tool/application rate
Lobatool oil brush, similar brush, non-linting cloth / 100-250ml/m²
The actual material consumption depends on the type of wood, the wood moisture content and the surface’s weathering.
An optimised impregnation / protective effect can only be assured if fibre saturation (maximum oil uptake by the wood) is achieved. This state can only be achieved on the vertical surfaces especially (e.g. on wall panels) after multiple applications.
Drying time
- approx. 12 hours.
Preparation:
- Remove any dirt, moss or old paint beforehand if required.
- Newly installed, largely closed-pore timbers are often unable to absorb adequate quantities of oil, so therefore the
pores will first have to be "opened". Please find the recommended preparation in our technical information of Lobacare
DeckDegrayer.
Processing:
- Apply Lobasol DeckOil evenly using a brush, Lobatool Oil-brush or non-linting cloth in the direction of the grain.
- After leaving to work for around 30 minutes, completely remove any unabsorbed oil using a non-linting cloth. A
single-disc machine with Lobasand SpecialPad beige can be used optionally.
- For wooden furniture, especially seating, rub until virtually dry using absorbent towels.
- If necessary, after drying overnight, apply another layer of oil.
General guidelines
Drying time:
The indicated drying times are valid for +20°C and 50% relative humidity, and assume careful, draught-free ventilation of the working area. Lower temperatures, higher relative humidity or poorer ventilation lead to longer drying times. Do not apply any protective coverings or wet clean the surface until full curing is achieved. Product-specific data can
be found in the relevant technical information.
The information in this document and all other advice and recommendations that we provide to help and assist the applicator is based on previous experience and relates to Spezial conditions. Because of the wide range of possible uses and conditions of application of our products, we do not relieve users from the need to carry out their own trials or to seek technical advice by speaking to the LOBA application engineering department. Observe the floor covering manufacturer's recommendations and the provisions of the current standards. Our liabilities and responsibilities are exclusively in accordance with our Terms and Conditions and are not extended by this information or by our advice. The publishing of a new technical data sheet automatically invalidates the earlier version.
What's in the box
1 x Loba Deck Oil Clear 2.5l steel container with instructions
