Model for Nintendo switch Controller
Model for Nintendo switch OLED Controller
Model for Nintendo switch Lite Console
Finally Put An End To Stick Drift !
(This Hall Effect Analog Work's For Both The Left And Right Joy-Con Analog's)
This Hall Effect Joystick Has A Longer Service Life, Is SUPERIOR In Quality , Performance And Reduces The Probability Of Stick Drift Faults Compared To The ALPS Analog .
This Hall Effect Joystick Can Be Used Directly In The Switch/Switch lite/Switch OLED controller (Joy-Con)
Specifications
Calibrating the replacement joystick after installation:
You may need to recalibrate the controller after installing the new module, this can be done on any Nintendo Switch console, follow the following steps.
From the HOME Menu select System Settings, then scroll down the menu on the left-hand side and select Controllers and Sensors.
Select Calibrate Control Sticks then fully tilt the control stick in any single direction for a few seconds on the controller you want to calibrate.
Follow the on-screen prompts to verify the control stick functionality.
If the calibration is complete but is not immediately reflected when testing the control sticks, do the following:
Set the console to sleep mode, then press the POWER Button to "wake it up" again.
Reset the Joy-Con or Pro Controller by pressing the SYNC Button once, then press any other button to power it on again.
What's in the box
1 x JoyCon Hall Effect Analog Compatible With Switch/OLED/Lite
