iCarsoft VOL V2.0 Multi-System Diagnostic Tool For Volvo/Saab
Please Note: Electronics And Software Are Not Refundable (Please Read The Ad Carefully Before Purchasing)
Product Features
iCarsoft VOL V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
Support OBDII/EOBD Ten Modes of Operation
Read Live Data
Full ECU Diagnosis
Applies to the single Brand of most of the Models equipped with OBDII-16 DLC
Easy To Use With Silicone Keys
Oil Light/Service Reset: Support service lamp reset.
Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.
Battery Management System (BMS), registers new battery to the BMS while battery replacement.
Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
Electronic Throttle Control system (ETC) relearns the throttle VA value while clear o replaces the throttle valve.
SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead or recalibrates SAS while steering part replacement.
ABS Bleeding, release the air to restore ABS Brake sensitivity or relearn while ABS replaced.
Injector coding, relearn the injector control parameter while the injector renewed or replaced
The Print Data function allows you to print out diagnostic data recorded by the scan
Battery test allows you getting the voltage of the battery with an OBD port by the scan tool when the engine starts.
DTC Library to lookup when the user is operating this tool.
Upgrade Via PC
Multi-language: English, German, Dutch, Spanish, French.
Eighteen Super Advantages:
Diagnose Single Brand of most Models (OBDII-16DLC)
Full System Diagnosis
Support Oil Service Reset
Electronic Parking Brake (EPB) system maintenance
Battery Management System (BMS)
Diesel Particulate Filter (DPF) Regeneration Control System
Electronic Throttle Control System (ETC)
Steering Angle Sensor (SAS) Calibration
ABS Bleeding(some vehicles do not enjoy this function)
Injector Coding(some vehicles do not enjoy this function)
Read &Clear DTC
Read Live Data
Support Battery Test
Support Data Review and Print
Full Speed Upgrade via PC
4.0? TFT LCD, 480*320 Pixels
Support Multi-Language
OBDII Functions:
Read Codes
Erase Codes
I/M Readiness - I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
Datastream.
Freeze Frame - When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
O2 Sensor Test - This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
On-Board Monitoring - This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Evap System Test - The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Vehicle Information - The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information about the test vehicle.
Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
Turn off Check Engine Light (MIL), clear codes and reset monitors
Read live PCM DataStream
Support CAN (Controller Area Network) and all other
Multilingual menu and DTC definitions- English, Spanish, and German, etc
Read pending DTCs
Read permanent DTCs
DTCs search
Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW
and J1850 PWM.
Works on most of 2001 and later OBDII compliant PETROL European vehicles
Works on most of 2004 and later OBDII compliant DIESEL European vehicles
Works on most of 1996 and later OBDII compliant US and Asian vehicles
View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Comprehensive Help, Including OBD Parameter, Mode Explanations & More
Specifications
Display: 4.0? TFT LCD, 480320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA at 12V (Typical)
Power Consumption: 1.8W (Typical)
Dimension: 206104.1x32.6 mm (L x W x H)
What's in the box
1x VOL V2.0 Main Unit
1x TF card (In the main unit)
1x Main Cable
1x Data Cable
1x User Manual
