Cast wheel hub cap. Before ordering a hub cap, it is necessary to measure the mounting dimensions of the plug on the wheel disc, as the original discs are not always installed on the car. Measurements must be taken as shown in the photograph on the product card. The black line represents the outer diameter, the red line represents the inner diameter, and the green line is the height where the latch is fixed if it is present. Some caps have a protective film that must also be removed.In the photo showing the dimensions, the cap is depicted schematically and may not match the actual appearance of the hub cap. Incorrect selection may lead to the damage of the plug, which is not considered a manufacturing defect. The difference in dimensions is determined by the error of the measuring instruments. When measuring, dimensions were rounded up.
What's in the box
4 x Motor Vehicle Hub Caps
