Gameon Hyper Racer Cockpit & Monitor Stand Bundle - everything you need for a proper sim racing setup.
Force feedback exposes every weak point in a setup. A desk clamp flexes, a wobbly TV table shakes, and your driving position changes every time you sit down. This bundle fixes all three: a fixed-frame aluminium alloy sim racing cockpit with a fibreglass bucket seat, plus a free-standing steel monitor stand that holds a 32" to 55" screen at true racing eye level. Two pieces, one setup, and a driving position you can repeat exactly, session after session.
The Bundle Includes:
- Gameon Hyper Racer Racing Simulator Cockpit
- Gameon Racing Cockpit Monitor Stand
- Monitor or TV is not included
Why You'll Love It:
- No flex under load - The cockpit uses a fixed-frame aluminium alloy chassis, powder coated and anodised, so nothing shifts or creeps when you are hard on the brakes.
- Bucket seat that holds you in place - The moulded fibreglass seat with cotton fabric cover supports your shoulders and hips through fast direction changes, so you are not fighting the wheel just to stay put.
- Fits every driver in the house - The seat slides 220mm front to back and tilts +6 to -6 degrees, so the same rig suits a taller adult and a younger driver from age 8 up.
- Wheel angle to match the car - The steering wheel plate tilts across a full 50 degree range, from +25 to -25 degrees, letting you run an upright formula angle or lay it flat for GT racing.
- Pedals set the way you drive - The pedal plate locks at 0, 7.5, 15 or 25 degrees and slides 150mm, so you get a natural ankle angle for heel-toe and steady pressure on a load cell brake.
- Screen at true eye level - The monitor stand locks at five heights between 920mm and 1120mm with a tilt-adjustable bracket, putting the display where your eyes actually are rather than where the desk happens to be.
- Rock solid with a big TV - Steel construction, a 50kg display capacity and a wide 685mm x 485mm base with levelling feet. Every unit passes a 10 degree slope stability test.
- Works with almost any display - The 725mm rail adjusts from 75mm to 400mm and supports 75x75, 100x100, 200x100, 200x200, 300x200 and 400x200 VESA patterns.
- Free-standing, not rig-mounted - The stand carries its own weight, so no vibration transfers into the cockpit frame.
- Tidy cable routing - Built-in cable management on both items keeps wheel, pedal, power and video leads out of sight.
- Fits all major sim racing hardware - Universal plates accept wheel bases, pedal sets and shifters from Logitech, Thrustmaster, Fanatec, MOZA and Simagic, on PC, PlayStation and Xbox.
Cockpit Specifications:
- Model: LRS08-BS02
- Frame: Aluminium alloy, fixed frame, powder coated and anodised
- Seat: Fibreglass bucket seat, cotton fabric cover
- Seat adjustment: 220mm slide, +6 to -6 degrees tilt
- Wheel mount: +25 to -25 degrees tilt
- Pedal mount: 0, 7.5, 15 or 25 degree tilt, 150mm slide
- Assembled size: 110cm (H) x 120cm (L) x 60cm (W)
- Driver weight capacity: 120kg (264lbs)
- Recommended age: 8 years and older
Monitor Stand Specifications:
- Screen size: 32" to 55", single screen
- Weight capacity: 50kg (110lbs)
- Height settings: 920mm / 970mm / 1020mm / 1070mm / 1120mm
- VESA: 75x75, 100x100, 200x100, 200x200, 300x200, 400x200
- Mounting rail: 725mm wide, adjustable 75mm to 400mm
- Base footprint: 685mm wide x 485mm deep
- Material: Steel, matte black finish
- Tilt bracket, levelling feet and cable management: Yes
Assembly:
Both items ship flat-packed with all brackets, hardware, levelling feet and instructions included. Build the cockpit, set your seat position, pedal angle and wheel tilt, then assemble the stand, lock your height, mount the display to its VESA pattern and route the cables. Allow around 600mm x 1200mm of floor space for the cockpit and 685mm x 485mm for the stand.
Care and Maintenance:
- Wipe the aluminium and steel frames with a soft dry cloth, or a lightly damp cloth for marks, then dry.
- Vacuum the seat cover regularly and spot clean with a mild fabric cleaner. Do not soak it.
- Re-tighten frame and bracket bolts after the first few sessions, then every few months.
- Keep both items indoors, out of direct sunlight and damp conditions.
- Do not exceed the 120kg driver capacity or the 50kg display capacity.
From club racing to endurance stints, this bundle gives you a rigid seating position and a screen at the right height from the very first lap - and consistency like that is what turns practice into pace.
What's in the box
1 x Gameon Hyper Racer Racing Simulator Cockpit (flat-packed)
1 x Fibreglass Bucket Seat with Cotton Fabric Cover
1 x Steering Wheel Mounting Plate
1 x Pedal Mounting Plate
1 x Gameon Racing Cockpit Monitor Stand Frame and Base
1 x Set of VESA Mounting Brackets and Hardware
1 x Set of Adjustable Levelling Feet
1 x Assembly Hardware Kit
2 x Assembly Instruction Manual
