Introducing Hydro seal's Hydro Sealant. This is a two-part waterproofing system incorporating a blend of cementitious powders combined with proprietary activating chemicals and high-grade quality aggregate fillers. It is designed for concrete, cementitious, and masonry substrates.
This is a versatile product that can be used on various interior and exterior surfaces.
Key Benefits:
- Cost Effective
- Set within minutes
- Pre-blended for consistency
- Available in two formulations for different needs
- Blocks water passages by sealing pores
- Can be applied on damp surfaces or green concrete
- Non-toxic and safe for use.
- Non-tainting mixing
101 uses:
- Sealant, Filler, Plaster, Paint
- Koi ponds
- Rising damp
- Sewer tanks
- Manholes
- Reservoirs
- Farm Dams
- Precast walls
- Newly plastered walls
- Parapet walls
- Balconies
- Roof tiles
- Coating stained marble plastered pools
- Repairing marble plaster
- Rock art crack filler
- Plinth - Dampness
- Concrete garden accessories - Garden furniture, plant holder, lamps etc.
Mixing Instructions:
IMPORTANT TO NOTE: Before you add any liquid, mix the dry ingredients properly to ensure that the active ingredients are distributed evenly. Suggested to use the Promix paint mixer
25kg Powder to 3 liter Bonding Agent to 6 liter Water
- Combine components in a suitable container, stir continuously to form a thick slurry.
- Allow the mixture to stand for 2 minutes to activate chemicals, then stir again before application.
- Apply on pre-saturated surfaces, ensuring coverage of at least 1.5kg per m per coat.
- Apply coats perpendicular to each other; allow 12 hours curing time between coats.
- Stir occasionally during application to prevent settling.
- Apply on pre-saturated surfaces, ensuring coverage of at least 1kg per m2 on 1st Coat and 1/2kg per m2 on 2nd coat
Special Instructions:
- Ensure surfaces are pre-saturated with clean water before application.
- Avoid applying over pooled or running water; use a sponge to damp down if necessary.
- Wash pool, pond, dam or any other water containing unit with clean water & soft brush or broom after 12 Hours of last & final coat. Remove
unsaturated powders if any with a sponge. Be careful not to drag feet or object over surface. Then fill with water.
- Allow adequate curing time before introducing chemicals or fish into water-containing units.
- These instructions provide a comprehensive guide for effectively applying Hydro Sealant to achieve waterproofing and structural integrity in various
applications.
What's in the box
1 x 25 kg Hydro Sealant Waterproofing
