Features:
1. This is a universalrotating encoder with a diameter of 40mm.
2. It uses the corresponding power supply voltage DC5~24V (collector open output type).
3. The position of the Z phase can be easily adjusted using the origin indication function.
4. It can achieve axial load, radial shaft load 30N, thrust shaft load 20N.
5. With reverse connection, load short circuit protectedcircuit, improved reliability (also equipped with linear output driver)
Specification:
Condition: 100% Brand New
Model: E6B2-CWZ6C
Application: Automatic Control
Read Mode: Contact type
Working Principle: incremental
Supply Voltage: DC 5 V -5% to DC 24 V + 15%
Ripple (p-p): up to 5%.
Current Consumption (x 1): Maximum 70mA.
Resolution (pulse / rotation): 1000
Output Stage: Stages A, B and Z.
Phase Difference Between Outputs: 90 45 between A and B (1/4T 1/8 T)
Output Configuration: NPN open collector output
Output Capacity: Applied voltage: 30 VDC maximum; Sink current: 35 mA maximum; Residual voltage: 0.4 V maximum (absorption current is 35 mA)
Maximum Response frequency (x 3): 100kHz
Output Rise and Fall Times: up to 1 s. (Control output voltage: 5 V, load resistance: 1 k , cable length: 2 m maximum)
Starting the moment of force: max. 0.9 mN.m.
Inertia Moment: maximum 1x10-6kg.m2; (maximum 3x10-7kg.m2, maximum 600 P/R)
Radial Shaft Load: 30N
Thrust Shaft Load: 20N
Maximum Allowable speed: 6,000r / min
Protected Circuit: power reverse polarity protected, load short circuit protected
Ambient Temperature Range: Operating temperature: -10 to 70 (no icing); Storage: -25 to 85 (no icing)
Operating / Storage Environment Humidity Range: 35% to 85% (no condensation)
Insulation Resistance: minimum 20M . (at 500 VDC) between the current-carrying component and the housing
Dielectric Strength: 500 VAC, 50/60 Hz, 1 minute between current-carrying part and outer casing
Vibration Resistance (destruction): 10 to 500 Hz, 150 m / s2 or 2 mm double amplitude, 11 minutes, 3 times in X, Y and Z directions
Impact Resistance (destruction): 1,000m / s23 times in the X, Y and Z directions
Protected Level: IEC standard IP50
Connection Method: IEC standard IP64 (JED standard IP64f resistant to drip, oil)
Material: Case: ABS; Main unit: Aluminum; Shaft: SUS420J2
Weight: Approx. 184g / 6.5oz
Package List:
1 x Encoder
3 x Screw
1 x User Manual
What's in the box
1 x Encoder
3 x Screw
1 x User Manual
