Din rail power supply 60w 12V ac dc converter dr-60-12 power supply 12v 60w good quality
Output Power: 51 - 100W; Output Type: Single; Output Frequency: 50hz; Output Current: 0-5A
Model: DR-60-12
note: 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 Celsius of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12 inch twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
output
DC voltage 12V
Voltage tolerance +/-1%
Rated current 4.5A
Current range 0~3.5A
Rated power 54W
Ripple&noise 100mvp-p
DCvoltage ADJ.range +/-10%
input
Voltage range 90~264VAC,127~373VDC
frequency 47~63HZ
AC current 1.2A/110VAC,0.65A/220VAC
efficiency 82%
Inrush current
Cold start current 25A/115VAC,50A/230VAC
Leakage current
Less than 1mA/240VAC
protection
Over load
Rated output power105%~150% start over load protection
protection type: hiccup mode,auto-recovery after fault condition is removed
over voltage 15.6~17.8V
protection type: cut off output voltage,diode clamp
environment
Working temp,humidity
-20 Celsius~+60 Celsius,20%~90%RH
Storage Temp,humidity
-40 Celsius~+85 Celsius,10%~95%RH non-condensing
Withstand vibration
10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes
safety
Withstand voltage
I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolated resistance
I/P-O/P,I/P-FG,O/P-FG: 100M ohms/500VDC
Fit Standard
Safety standard
Fit UL1012
EMC standard
comply with EN55022,CLASSA
colour: white
Material: ABS+ electronic components
size: 9.3x7.8x5.6cm
Package Contents:
1xRail type power switch
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
What's in the box
1 x Rail Type Power Switch
