Features: 1.Five-digit big LCD, super low power consumption, large and clear indication. 2.Reset counting: Press the pause button (PAUSE) to pause the counting, and then press the reset button (RESET) again to resume the counting. 3.Use magnetic induction, easy to install and precise counting. 4.Maximum counting speed: 20 times per second. 5.Use the common AA battery, free from external power supply. 6.Anti-vibration, efficiently make sure the stable and reliable system operation. 7.Free from mechanical abrasion, safe work, long lifespan. Specifications: Condition:100% Brand New Color: As shown in the picture Power: 1.5V-AA battery(Not included) Available ambient temperature: -5-40 C Distance within the magnetic induction: about 5-10 mm Hole size: Approx.63x35 mm/2.5x1.4in Application Method: 1. Start counting: connect the magnetic control induction switch to the counting terminal, according to the requirements of actual operation, flexibly assemble the magnetic induction switch and magnet on the appropriate positions of device, and then do counting once, meanwhile, make the magnet approach and leave the magnetic control induction switch once. 2. During operation, make the magnet follow device with distance from the magnetic switch within 0.5-1 cm, and then move the magnet to lengthen distance to be 3-5cm, and next, start count as 1, repeat the procedures, and accumulate count, like: 0, 1, 2, 3, 4, 5, 6 ......(Note: start count when the magnet moves away). During assembly, please adjust the positions of magnet and induction switch, as well as their distance. 3.Reset counting: Press the pause button (PAUSE) to pause the counting, and then press the reset button (RESET) again to resume the counting. 4.Reset: directly press the Reset button; or additionally connect one Reset button (need to buy by end user) to the reset terminal, and then press it to reset the device. Note: during reset, no matter the counter is in startup state or standby state (LCD has no indication), data will be erased and the LCD indication is 00000. 5. The counting signal and reset signal only can be inputted with contact signal, other power signals are not allowed. 6. The operation temperature of magnet should be within 70 degree, over high temperature will cause magnetism lose, further to invalidate induction. Package List: 1xDigital Counter 1xProximity Switch 1xMounting Bracket 1xMagnet
What's in the box
1 x Products
