Common dual-use network cable tester
$. When the netwark line opens, the main tester dinplays the same, and the correspending opening tine lighe: on the remete tester are nat
!.funttisnality.
brighl. There are severallines open,and the remote tester shows that at of the first lights on the open road are not bright. When the line is_
Paubiene ed 23213 6.7.8:
less than 2 wiret, the remote tester's light is not bright.(such as line 3,
To the above line (righ).Scan and test root byroot (res).Distinguish
line 4illustraten
l.Use methed which one (tn) the wrong line, shert circuit and open.
The enonch 3 7--
1. Set the power pwitch to the ON locshen for ouick scan test, (S is the slow
6.i you use the main tester to best the fine, the wilring is good, the main ngeer lamp is not bright, the wiring is bad, and the main tester line lamp
best filel.The main teuter G.1.2.34.5.4.7, lights are shining in
sequence, indicating that the maciine is in normal working condition. is shining. jumper arire is reguired to lead to the tester. y. If the distribution frame or wall block module is tested, the matching
2. Type the line end plug that needs to be tested intethe port corresponding to the remote tester.(Try to keeg the plug and socket in
contact. Otherwise, it wnill affect the scan result.)If the test line is Intelligent network cable tester
all the live end is gopt; The main bester and the remate tester light
Cable: Main bester: wining is correct: Fourcore wire line: Sin-core wire wining: Remote tester:-1-2-1--4--5--6-- emote tesi 8 3 :6-1-2-3-4-5-6-7-8 flashes in sequence from G.1,2 te 7.8. if you don't have a wire on the L usage: and siou. L-I speed selection ia normal working condition. Default high speed test; During the testing process, the length of the length is 2 seconds according to the Sw,which is converted to manual point dynamic test by the SW, and the three automatic scanning speeds are high, medium meaty is the SW in seconds.At this time,the main tester G,1,2,3,4,5 o During the high speed test, the speed of the first level test is changed67.and 8 lights are shining in sequence, indicating that the machine is ground, the remote machine's g-lights won't shine. Flash case when the
Main tester: Remote tester; --2--3-4--5 G-1-2-3-4-5-6-7-8 in any test speed enwironment, the long press will be turned off in s ppeed. Leng press SW to open key 2 seconds,exit manual point motion test. Remote tester: Two-core wire line:
3. if the wiring is incorrect, the lighting display mode: Main tester; G-1-2-1--4--5--6-7-8 ---..-3-4---- operation secands by SW. Plug-in network cable tester the tester will automatically shut down after 20 minutes without any When there is a network line short circuit (for example: line 4,line 5 short
and the remote tester are brighi. Remote tester:G--1--2--3--6--7--8 Main tester: -1--2--3--6--7--8 4. if the two network lines are in disorder, the lighting display mode: several wires are short circurted, none of the lights an the main bester circuit), the main tester and the remote bester no.5 are not bright. When I: the function national policy of energy conservation and emission reduction. batery and reduce the production cost of the user. it is in line with the The plug-in electric tester can reduce the environmental pollution of the The process is convenient, simple and stable, Choose in any work situation with US8 5v power supply power supply (such as: computer, mobile phone
fine 3 and line 5): The remote tester is shown as:G-1--2--3--4--5--6--7--8 The main tester is unchanged:G--1--2--3--4--5--6--7--8 When the connection sequence of the two wires is wrong. (for exampie, defauit high speed test. the DV port; At this time, the main tester G,1.2,3,4,5,6,78 lights are charper,charging treasure, mobile phone, with the function of charging shining, indicating that the machine is in normal working condition. Boot platooninsert) using a mobile phone data line connection into the tester of
What's in the box
1xcommon Dual-Use Network Cable Tester Kd-1
