Power Inductor (SMD), 10 µH, 1.5 A, Unshielded, 1.1 A, DO1608C, 6.6mm x 4.45mm x 2.92mm
Product Information
Inductance: 10µH
RMS Current (Irms): 1.5A
Inductor Construction: Unshielded
Saturation Current (Isat): 1.1A
Product Range: DO1608C
Power Inductor Case: 6.6mm x 4.45mm x 2.92mm
DC Resistance Max: 0.16ohm
Inductance Tolerance: ± 20%
Product Overview
The DO1608C-103MLB is a surface mount unshielded Power Inductor with ferrite core. This inductor features gold over nickel over moly-manganese terminations and is resistance to soldering heat maximum three 40 seconds reflows at +260°C, parts cooled to room temperature between cycles. This inductor features moisture sensitivity level (MSL) of 1, failures in time (FIT)/mean time between failures (MTBF) is 38 per billion hours/26,315,789 hours, calculated per Telcordia SR-332 and only pure water or alcohol recommended for wash. Current at 25°C causes an inductance drop of 30% typical from its value without current and Inductance tested at 100 kHz, 0.1Vrms, 0ADC using an Agilent/HP 4263B LCR meter or equivalent.
High energy storage and very low resistance
Defence Supply Centre CID A-A-59742 standard
What's in the box
1 x Coilcraft (DO1608C-103MLB) Power Inductor
