Circuit Thermal Breaker Thermal Protector For Generator
1 pcs Circuit Thermal Breaker Thermal Protector & 1 pcs Electric Solenoid Valve
Rated Amp: 30A;Rated Voltage: 125/250Vac 50Vdc 50-60HZ
Break capacity: 1,000Amp x 125Vac 20Amp x 205Vac
Hipot Tested at 1500Vac/minute
Min Voltage: less than 0.25V
Material: metal + plastic
Load Protector:
Recovering time: within 60 second
Insulation Resistance: Bigger than 500Vdc x 100MOhm
Overload Circuit breaker 30A 125/250VAC 50VDC 50/60HZ for portable generators 30A socket.
It fits most 30A socket of the portable generators.
Assembly and overload trip time.
Colour:Black
electric solenoid valve:
Max fluid temperature: 100 Celsius
Operation mode: normally closed
Usage: water and low viscosity fluids
Valve type: diaphragm (operated by Servo)
Color: as picture shows
Screw diameter: approx. 20mm
Size: approx. 84 x 57mm (L x H)
Coil size: approx. 34 x 23mm (W x H)
Voltage: DC 12V
Power: 8W
Current: 0.6A
Inlet and outlet: hose barbs for 1/2 inch (outer diameter) hose
Pressure: 0.02- 0.8Mpa
Package included:
1 x Load Protector
1 x Screw ring
1 x ring
1 x electric solenoid valve
Note:
It is not suitable for use with gravity fed systems
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
What's in the box
1 x Load Protector
1 x Screw Ring
1 x Ring
1 x Electric Solenoid Valve
