About:
Built-in float switch! (No separate float switch is needed)
This efficient submersible bilge pump is used to remove unwanted water through drainage.
Flow Max: 47L/min (750GPH)
Head Max: 4m
Voltage: 12V DC
Outlet: 29mm
Features:
- No separate float switch is needed.
- Fully Automatic.
- Built-In float.
- No power used until float activates pump.
- Compact, efficient long life motor.
- Ignition and corrosion resistant stainless steel shaft.
Please Note:
- Due to the high resistance in DC motors, these units are not designed to operate non-stop or for prolonged periods.
- A fuse also needed to be installed toprevemt the pump from burning out.
- The pump is is not designed to run dry, this will damage the pump.
- Please make use of the wiring diagram. The brown and white wire is for the automatic function with the float switch, the brown wire is for themanual function without using the float switch. If both modes wish to be used, a three way switch is needed.
What's in the box
1 x Automatic fully submersible 12 volt DC bilge pump (750GPH)
