Adam Professional Audio Sub10 MK2 - 200W 10" Active Subwoofer
Adam Professional Audio Sub10 MK2 Overview
Audio engineers looking to fill out the low end response of any stereo or 5.1 surround monitoring system should check out the Adam Audio Sub10 MK2, a high-quality subwoofer well suited for professional and project studios. The Sub10 MK2 features a 200W RMS (300W peak) amplifier, which powers the 10" woofer. It offers both XLR and RCA I/O connectors for seamless integration into any system setup. The bandwidth of the Sub10 MK2 and the connected speakers may be adjusted separately, allowing it to be used with many different satellites.
Crossovers are made as musical as possible thanks to variable fourth-order Linkwitz-Riley filters. The incoming signal can be phased from zero to 180 degrees for a great degree of flexibility in placement of the subwoofer. Rear-panel gain and filter adjustment controls are provided. A down-firing bass reflex tube avoids breathing noise. Multiple units may be chained together if desired. The Adam Audio Sub10 MK2 ships with a power cord and four protective rubber foot plugs.
Excellent low-end companion to any sound system
Full XLR and RCA I/Os
Cool-running 200W RMS (300W peak) amp uses pulse width modulation (PWM) to provide greater than 80% overall efficiency
Down-firing bass reflex tube reduces breathing noise
Multiple units may be chained
Bandwidth of the subwoofer and connected speakers may be adjusted separately
Variable fourth-order Linkwitz-Riley filters for musical crossovers
Incoming signal can be phased between 0 and 180 degrees, allowing a high degree of placement flexibility
Gain and filter controls on rear panel
Key Features
10" Coated Paper Woofer
Down-Firing Bass Port
Amplifier: 300W Peak
Frequency Range: 25 to 150 Hz
Maximum SPL: 113 dB
XLR and RCA Inputs
Phase Switch + Linkwitz-Riley Filters
Level and Crossover Controls
Auto Power On/Off
What's in the box
1 x Sub 10mk2 subwoofer
1 x power cable
