1 Intelligent control: Even amateurs can freely paint. 2 The nozzle with intelligent temperature sensing and heating function is the first in the world. 3 Eight digital speed controller for more precise and stable extrusion. 4 A single pressing can continuously squeeze out flow, making it easier to doodle. 5 Built-in nozzle for easier maintenance.Features:
Intelligent control: Even amateurs can freely paint.
The nozzle with intelligent temperature sensing and heating function is the first in the world.
Eight digital speed controller for more precise and stable extrusion.
A single pressing can continuously squeeze out flow, making it easier to doodle.
Built-in nozzle for easier maintenance.
Patented nozzle with low tip temperature.
Specifications:
ABS filament: 180-210 C
PLA filament: 160-180 C
Support material: 1.75mm PLA / ABS
Equipment output rated power: DC12V 3A 36W
Size: approx. 21.5 x 13 x 7cm / 8.46 x 5.12 x 2.76inch
Package List:
1 x Printing Pen
1 x Power Supply
1 x Bracket
1 x Three-color Consumable
1 x English Manual
1 x Sample Paper
How To Use The Pen
Connect the adapter to the power source, then insert the end of the adapter's wire into the power hole of the 3D pen. The LED light is yellow to indicate that the device is turned on and enters standby mode.
Step 2: Material / Filament Selection
After step 1, the LED screen displays "PLA" or "ABS". Press "Material/Temperature Button" to select the type of material you are using. It must be the material used. The wrong choice may cause potential malfunction. (Note: This device can extrude wood filament and work in "PLA" mode)
Step 3: Warm up
After selecting the material, press the "Feed button", the LED light is red, indicating that it enters the warm-up mode, and the LED screen displays the real-time heating temperature. When the LED changes from red to green, you can start graffiti with the pen when the warm-up process is over. (Preheating takes about 30 seconds.)
Step 4: Select the drawing speed
Press the Speed Control button to select the most appropriate drawing speed. (Note: 8 digital speed controls from 1 to 8, 8 is the fastest.)
The processing speed button only works when the drawing is stopped and the LED light is green, and in other cases the processing will be futile.
Step 5: Loading
Insert the selected material into the feed hole at the end of the pen and press the "Feed Button" and the filament will be moved by the built-in motor. When the molten material comes out of the nozzle, it means the setting is successful, you can start graffiti now.
Step 6: Create your work
The device is designed with 8 speed controls. Please select the appropriate drawing speed before graffiti. Different types of filaments have different melting points. Please adjust the temperature in time according to the extrusion status.
Step 7: Extrusion flow function
Press the "Feed button", the pen will continue to squeeze out and flow, press the "Feed button" again, the pen stops feeding.
When the pen is used continuously for 8 minutes, the pen will automatically stop feeding and extruding.
Step 8: Replace/unload material
When the LED is green, press and hold the "Unload button" for 3 seconds, then release and the built-in motor will begin to remove material. When the material stops moving backwards, gently remove the material from the end of the pen, then press the "Unload button" and the motor stops reverse. (Intermittent fun moves will stop automatically after 1 minute of work)
Step 9: Finish the work
After completing a drawing, remove all filaments to avoid adversely affecting the normal use of the device in the future. (Note: The device is sturdy and the equipment is great, but like all machine tools, rest after an hour of continuous use to extend its life.)
What's in the box
1 x Printing Pen, 1 x Power Supply, 1 x Bracket, 1 x Three-color Consumable, 1 x English Manual, 1 x Sample Paper
