26 Inch-55 Inch Tv Led Constant Current Board Booster Stv Board
2 pcs Universal Inverter:1 pcs green Universal Inverter & 1 pcs blue Universal Inverter The LED Strip Voltage must be between 60V-165V. Not less than 60V, if less than 60V, you can choose our other item..Not higher than 165V, the product design conditions shall not exceed the maximum working voltage of 165V.If the voltage exceeds, the screen will appear dark or flashing lamp and so on.This product is only constant, not constant voltage, the voltage will automatically adjust to the appropriate voltage according to the led strip need. Now you need to do the two things:First, attempt to use the remote control after connected to the transfer barefoot to try brightness, if not resolved,test the actual pin voltage (Note: it will be the greatest brightness in 0V, the brightness will be the darkest in greatest Voltage), if it is an analog voltage mode voltage range is between 0V-5V or 0V-3.3V, if the voltage has been in hight condition all the time andcan not be reduced, now you need to adjust it. the voltage is 3.3V .if it is PWM signal, it still can be up to request if adjust to the greatest brightness at this time ,you need to do second program.Second, adjusting the resistance, increases the current to meet the requirements. Description:Not provide technical support. you should know how to use it. If not, think twice before your order.Product Name:Super universal interface 2P 6P 10P 12P full interface universal LED boost board LED high voltage board.LED connection must pay attention to the definition of the interface is only positive and negative points, the positive input power supply must not be reversed or wrong,Improper connection caused by the consequences of their own, special reminder. LED high-pressure board conversion instructions 1: Connect the power, ground, and switch signals required by the booster board to the universal LED booster board VCC Power ON Switch Signal ADJ Brightness Control GND Ground HINT: Connect the same way as the LCD high voltage board 2: with a multimeter to measure the amount of LED light bar is the number of lines, which are a few negative which are the number of lines which are a few lines Line is only in the more positive and negative points, engage in technology should not amount to see the original boost board can see out of the definition. Specifications: Model: CA-288 Used for: 26inch-55inch LED TV Input Voltage: 19-45V DC Output Voltage: 60-165V DC Output current: 200mA (Constant) Size: 120x60mm/4.72x2.36 inch + 12.3cm x 3.1cm Interface definition: Outputs 12 interfaces -3 + 4-3 -4 + 2-4 + 3-9 -1 + 1 -2 + 2-2 electronic wire -2 + 2-2FFC -4 + 2-4 -3 + 4-3 -5 + 2-5 x 2 Small mouth x 2 Input: Power supply switch signal brightness control ground wire (Same as LCD) Not all of the interfaces are soldered on, we pre-installed one or more details see above description. color: blue + green Material: plastic + metal Package Included: 2 x Universal Inverter 2 x 4 pin cable Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
What's in the box
2 x Universal Inverter
2 x 4 Pin Cable
