Features:
• DZR brass body, epoxy coated.
• Magnetic drive.
• Dry type indicator for clear reading.
• Pulse prepared with different pulse settings available.
• Capable for recalibration.
• Not sensitive to fine solids. No inlet strainer
• Supplied with brassTailpieces/Connectors.
• Each meter has a unique serial number.
• Inlet and Outlet threads compatible with ISO metric sizes.
Accuracy:
• In the lower zone from qmin inclusive up to but excluding qt is ± 5%.
• In the upper zone from qt inclusive up to and including qs is ± 2% (Hot water meter: ± 3%).
Working conditions:
• Working temperature: ? 50°C for cold water: 1600 kPa (16 Bar)
• Working temperature: ? 90°C for hot water: 1000 kPa (10 Bar)
Compliance Standards:
• 40mm Water Meter Complies with SANS 1529-1: Class C.
• Conforms to ISO4064: Class B.
Installation requirements:
• Must be installed on a horizontal pipeline with the dial facing up
• Pipeline must be flushed before installation.
• Meters should be constantly full of water during operation.
Dimensions (with reference to diagram):
L: 260mm ; B: 88mm
D: 40mm BSP
d: 32mm BSP (25mmND refers to the internal inlet diameter)
H: 130mm
Important to note:
• No hemp to be used during installation.
• No soldering or heat to be applied during installation
What's in the box
1 X 25mm Flow Meter
2 X Brass Tail Pieces
2 X Rubber Gasket
