Multifunctional Jump Starter With Air Compressor :
1: It takes about 3 hours for the product to be fully charged. You must turn it ON first, and then charge the product.
2: When starting the car, you need to turn the switch to OFF before starting the car.
3: There is a difference between peak 400A and peak 600A in our car power supply. The product with peak 400A has a multiplier of 40C, which can start gasoline cars with a displacement of less than 4.0. The multiplier of peak 600A is 60C. It can start gasoline cars with a displacement of less than 6.0. And diesel cars with a displacement of less than 2.0. (Except for cars with aging engines.)
5: If the product is not used for a long time, it is recommended to charge it once every 3 months.
6: The product needs to be placed at room temperature, which is beneficial to the service life of the product.
Specifications:
1. Name: 20000mah car jump start
2. Model: D79574
3. Color: Red + Black
4. Material: ABS
5. Battery Capacity: 20000mah
6. Battery type: Polymer lithium battery
7. Charging input: 15V 1A
8. Output Voltage: 12V
9. USB Output: 2A
10. Charge Mode: CC/CV 15V 1A
11. Starting current:300A
12. Peak current: 600A(3s)
13. Cycle Life: 3000 times
14. Charging time: 2-3h
15. Use Temperature: -20~60?
16. Light mode: LED torch, SOS, LED strobe
17. Size: 165×80×35mm
Special precautions for using mobile power:
When starting the car, insert the blue plug tightly and in place, otherwise the effect will be affected.
When starting the car, the blue battery indicator should preferably be above 60%, so as to extend the service life of the product.
If the car cannot be started, do not force it to continue. Check whether the battery clamp is properly clamped, and whether the battery head of the original car is rusty or dirty. Continue to start after cleaning up.
During the starting process, if the vehicle cannot be started all the time (1-2 times), do not force it to continue. You should further check whether there are other faults, otherwise the fuse will be burned and the starting power supply will be damaged.
5: When starting the car and using the clip port to use the air pump and other on-board electrical appliances, you need to turn the switch to OFF.
6: Our car power supply uses different styles of 400A and 600A. If your car exceeds the A number of the product, the power supply will have an automatic power-off protection function during the start of the car. Plug in the charger and reactivate it and you can use it normally.
7: When the car is fed and has no electricity at all, the car power clip can be directly clamped on the positive and negative poles of the car to start. If the car is powered, remove the positive pole and clamp the clip on the ground. On the iron, clamp the negative pole on the negative pole. It can start.
8: The first time you start the car, you need to discharge the power in the product, then plug in the charger to charge, and then start the car.
What's in the box
1x 20000mAh 12V Multifunctional Jump Starter With Air Compressor Kit
