1. Connect the battery to the positive and negative terminals of the charging regulator.
2. Connect the photovoltaic module to the positive and negative terminals of the regulator.
3. Connect the user to the positive and negative terminals of the charging regulator.
Apply the reverse order when uninstalling!
Improper sequence can damage the controller!
This is a new solar controller that can fully meet the requirements of your home photovoltaic system (including home lighting system). It can automatically regenerate 12V and 24V lead-acid gel batteries
50A
If your battery is 12V, the maximum solar panel input is 25V 600W
If your battery is 24V, the maximum solar panel input is 50V 1200W
Feature:
1. Built in industrial microcontroller.
2. Large LCD display screen, all parameters adjustable.
3. Complete 4-level PWM charging management.
4. Built in short-circuit protection, open circuit protection, reverse connection protection, overload protection.
5. Dual MOSFET reverse current protection, low heating.
Specifications:
Rated voltage: 12V 24V automatic
Application: Solar System Controller
Current: 50A
Equipped with a timer and light sensor, it can be used for solar lighting systems.
Only applicable to off grid photovoltaic solar energy systems.
For 10A 12V photovoltaic system: 120W solar panel, 12V lead-acid battery, 21V for maximum input voltage
For a 20A 24V photovoltaic system: 240W solar panels, 24V lead-acid batteries, 42V for maximum input voltage
>>Safety instructions
Before the first installation, please ensure that the battery has sufficient voltage to enable the controller to recognize the battery type.
2. The battery cable should be as short as possible to minimize losses.
3. The regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL
It is not suitable for nickel hydrogen, lithium-ion or other batteries.
4. The charge regulator is only suitable for regulating solar modules. Do not connect other charging sources to the charging regulator.
>>Product Features
1. Built in industrial microcontroller.
2. One click setting, numerical display, automatic memory function.
3. Complete 4-level PWM charging management.
4. Built in short-circuit protection, open circuit protection, reverse connection protection, overload protection.
5. Dual MOSFET reverse current protection, low heating.
>>System connection
1. Connect the battery to the charging regulator - positive and negative. If a 12V battery is detected, it will display 1; If a 24V battery is detected, display 2
2. Connect the photovoltaic module to the regulator - positive and negative.
3. Connect the user to the charging regulator - positive and negative.
Apply the reverse order when uninstalling!
Improper sequence can damage the controller!
What's in the box
1 X 50A Solar Controller
