Coxn-Top Selections from South Africa - Quality & Affordability Combined
Standards Compliance - Extra bright 1000 lumens torch and 520nm greem laser light combo. LED light is more stable, with a more pronounced spotlight effect and transmittance. Tactical-level output with total internal reflection lens for close- to longer-range applications
4 Different target acquisition methods - 1000 Lumen flashlight only, laser only, strobe, and flashlight and laser together. These modes can be switched by two switches at the end, which is enough to cope with different usage scenarios
USB Rechargeable Battery - The battery system adopts a one-touch ejectable rechargeable design, just press the front button to eject the battery, and plug it in directly for charging through the included USB port, which reduces battery waste and increases its service life, further improving the efficiency of use
Ultra Long Distance - Long distance green dot laser sight, clear and extra bright laser beam, power output 5mw. Dot laser daylight as 200 yard, can be reach 350 yard at night. Do not point the laser at your eyes to avoid damage to your vision
Made of aircraft grade aluminum alloy, impact-resistant polymer; shockproof and tear resistant, weatherproof-O-ring and gasket sealed. Can be adapted to standard size picatinny as pistol light / rifle light, etc
Flashlight/Laser won't turn on Q&A
Q: What to do if the flashlight doesn't work?
A: The flashlight has been transported and stored, there may be insufficient power, resulting in the flashlight can not be opened; so you need to charge it before use, and wait for sufficient power before use.
Q: What if the battery is not charging properly?
A: It may be due to a long period of transportation leading to a loss of power, you can use a low current for slow charging to activate the battery, and then you can charge and use it normally.
Q: How do I charge? How do I know if the flashlight is fully charged?
A: Charging through the USB cable included in the package, about 1.5 hours to be able to charge from 0% full, The indicator light changes from red to green to indicate that it is fully charged.
Q: What should I do if the flashlight won't turn on even though the battery is fully charged?
A: You can use a paper towel or towel with a little bit of water or alcohol, and then clean and wipe the electrode part, wait until it is dry and then try to turn on the flashlight.
Q: What should I do if the flashlight/laser still won't turn on with the above?
A: Whether it is the flashlight/laser that cannot be turned on, or any other reason, Please consult our service staff in time after the problem occurs, we will provide 24-hour service to solve the problem for you unconditionally.
Charging Instructions and Precautions
After ejecting the battery through the button, remove the battery, there is a micro USB jack at the bottom for charging. Insert the charging cable into the connector to charge.
After charging for about 1.5 hours, the indicator light will change from red to green, which means that the charging has been completed, pull out the USB charging cable can be used.
The charged battery needs to be put back into the combo in its original position, press and hold the eject button and insert the battery into the bottom.
At the same time, our package comes with a USB charging cable for easy charging.
Note: Do not shake the connection and the charging cable violently when plugging in the USB or during the charging process to avoid damage such as loosening of the slot.
Note: When installing the battery, please hold down the button or insert the battery directly into the bottom, and after you hear the click sound to indicate that the battery has been seated tightly, in addition, please do not pull out the battery forcefully, in order to avoid damage caused by the installation can not be installed!
What's in the box
1 x Laser Flashlight
1 x USB charge cable
1 x Socket Head Wrench
1 x Manual
