Name: Gravity Induction Timer (Charging Version)
Size: 44 x 44 x 46mm
Material Science: ABS Product parameters
Battery capacity: 500mAh
Working temperature: 0C-50
Standard power consumption: 20uASleep power consumption: 150uA
Working current: 11mACharging current: 500mA
Volume range: Silent/Vibration, 90-100dB high, 70-80dB low
Product Operation Instructions
Gravity mode: Turn the button to the mode
1 - Flip upwards for 5-10 to 30-60 minutes to automatically start the countdown. The screen will flip up and pause, while the other screen will reset to zero for the countdown.
Manual mode: Move the button to Mode
2 - Adjustable M/S button, press the middle button ST/SP to start the countdown.
Time: When displayed as 00:00, press the [SP/ST] key briefly to start the countdown. During the timing process, press the [SP/ST] button briefly to pause/start the countdown
3 - In pause mode, long-press the [ST/SP] key to reset to zero.
- Countdown setting: Short-press the [M/S] key to gradually increase the countdown time, long-press the [M/S] key to quickly increase the countdown. After setting, press the [SP/ST] key briefly to start the countdown
4 - During the timing process, short-press the [SP/ST] button to pause/start the countdown; After the countdown time reaches 00:00, there will be a one minute long alarm clock (the Didi Di LED screen will light up/the sound will stop, and the LED screen will turn off - these two prompts are grouped in 1-second cycles - reminding you). Silent mode vibration reminder.
5 - Memory mode: After the countdown ends, press the [SP/ST] button again briefly to display the current set time. To reset to zero, press and hold the ST/SP button. Short press to repeat the operation.
Matters needing attention: If the user forgets to turn off the device or takes no action after 5 minutes, the product will automatically enter sleep mode. After the countdown ends, the alarm duration is 1 minute. After hibernation, if the gravity mode is not switched off, it can be immediately flipped over for use. Manual mode can be adjusted with just one press; In silent mode, there is vibration feedback at the end of the timer or any operation. When operating in volume mode, there is a beep sound feedback; If the battery level is below 10%, the screen will flash to remind you to charge. The charging process will turn on a red light, while the fully charged green light will remain on.
What's in the box
1 x Gravity sensing timer
1 x USB data cable
